Preparations For Installation; Standard Fittings; Installation Position Selection - Gree GMV-ND28TS/A-T Manuel D'utilisateur

Two-way Cassette Indoor Unit Owner's Manua

3 Preparations for Installation

Note: this picture is for reference only, please refer to the actual product; the unit of dimension
is mm.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No.
1 Drainage hose assembly
2 Special Nut
3 Insulation
4 Insulation
5 Sponge
6 Fastener
paper pattern for
7
installation
Tapping screw with
8
washer
9 Remote controller
10 Washer fixing plate
11
corrugated pipe

3.2 Installation Position Selection

(1) The location should be able to withstand the weight of unit.
(2) The water can be drained conveniently from drainage pipe.
(3) There should be no obstruction near air inlet and air outlet.
(4) Follow the installation distance required in the fig below to ensure sufficient space for
maintenance.
(5) The installation location should be far from heat sources, flammable or explosive gas, or
smog spread in the air..
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Name Appearance Q'ty
1 To connect the drainage pipe
To be used for connecting the
1
refrigerant pipe
1 To insulate the gas pipe
1 To insulate the liquid pipe
1 To insulate the drain pipe
4 To fasten the sponge
1 Locate the drill hole on ceiling
4 Fix paper pattern
1+2 To control the indoor unit
4 Prevent the washer from falling off
It's used for bending connection
pipe（ Packing materials for 56 or
1
above models）
5
Usage