Preparations For Installation; Standard Fittings - Gree GMV-ND22TD/A-T Manuel D'utilisateur

3 Preparations for Installation

Note: this picture is for reference only, please refer to the actual product; the unit of
dimension is mm.

3.1 Standard Fittings

Use the following provided accessories according to the requirement.
No.
1 wireless controller
2 paper pattern for installation
3 Tapping screw with washer
4 Washer fixing plate
5 Drain Hose Assembly
6 Special Nut
7 M10X8 Nut with Washer
8 M10 Nut (M10X8.4 Nut)
M10 Washer (Spring Washer
9
M10X2.6)
10 Insulation
11 Insulation
12 Sponge
13 Fastener
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
Name Appearance Q'ty
1
INSTALLATION MODEL PAPER
Installation hole Installation hole
in the main body in the main body
1
Articulation
Arch installation paper
Screw
Ceiling
Lifting bolt distance is 680mm
Installation hole Installation hole
in the main body in the main body
Center of ceiling opening
4
4
1
1
4
4
4
1
1
1
4
5
Usage
To control the indoor unit
Locate the drill hole on ceiling
Fix paper pattern
Prevent the washer from falling off
To connect with the hard PVC drain
pipe
To be used for connecting the
refrigerant pipe
To be used together with the
hanger bolt for installing the unit.
To be used together with the
hanger bolt for installing the unit.
To be used together with the
hanger bolt for installing the unit.
To insulate the gas pipe
To insulate the liquid pipe
To insulate the drain pipe
To fasten the sponge