Manual Program Start - Irritrol IBOCPlus Guide D'utilisation

MANUAL STATION START
This option enables individual stations to be operated for a selectable
duration from 1–59 minutes. Each station selected to operate is given a
temporary run time. As one station finishes operation, the next station
in sequence begins operation.
1. Turn the function dial to the
2. Select the Master Valve On or Off for this operation by pressing the
+/ or –/ button.
ON OFF
3. Press the
NEXT
4. Press the or
+/
ON
5. Repeat steps 3 and 4 for each station you wish to operate.
Note: Once a station is running, selecting 0 minutes will terminate
the current station activity and advance to the next station with a
manual run time assigned.
6 When the manual operation is complete, return the dial to the
position.
AUTO RUN

MANUAL PROGRAM START

Use this feature to manually operate a selected watering program. You
can run the entire program or start anywhere within the station
sequence of the program.
Note: Only the stations with an assigned run time in the program will
operate during the program watering cycle.
1. Turn the function dial to the
2. Select program
3. Press the
NEXT
sequence (if other than the station number displayed).
4. Press the +/
ON
start with the selected station and will be followed by all
subsequent stations with an assigned run time in the program. The
display will show the run time remaining for the operating station.
5. When the manual operation is complete, return the dial to the
position.
AUTO RUN
Operating the Controller
MANUAL STATION START
button to select the first station you wish to run.
button to select a run time (1–59 minutes).
–/
OFF
MANUAL STATION START
, or with the
A B C
button to select the first station of the watering
button to start the watering cycle. Watering will
button.
PROGRAM
position.
position.
23