Güde GH 5.6-50 Traduction Du Mode D'emploi D'origine page 37

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
The device must never be operated when
persons, especially children, or pets are nearby.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
Wear personal protective equipment.
· Wear goggles.
· Wear ear protectors.
· Wear solid shoes and long trousers.
· Do not wear loose clothing or jewels. Hear,
clothing and gloves must be out of reach of
moving parts as they could get caught by the
rotating parts. Do not use the appliance when
barefooted or in open sandals.
· Use protective gloves when handling the
blades.
Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage.
Wear ear protectors.
When working with the device, a certain level of
noise cannot be avoided. Noisy work should be
scheduled for hours, during which it is allowed
by statute or other local regulations. Adhere to
any applicable rest times and limit your working
time to the necessary minimum time. For your
personal protection and the protection of people
nearby, suitable hearing protection must be
worn.
Risk of injury
Rotating blades may lead to serious injuries
by cutting or amputating parts of the body.
Be careful to avoid injury by the cutting tools.
Careful appliance handling reduces the risk of
injury by knife.
Before any adjustment, cleaning and
maintenance work, switch off the device and
disconnect it from the power supply.
Wait until all rotating parts have stopped and the
appliance has cooled down.
Provide adequate lighting or good lighting conditions
when working with the machine. Poor lighting/light
conditions represent a high safety risk.
Check all screw and plug-in connections and
protective equipment if firm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Do not store the appliance in enclosed places just
after being switched off but let it cool down outdoors
instead.
Never keep the unit with petrol in the tank inside a
building where petrol vapours could get in contact
with open fire or sparks.
Do not change the controlled engine setting and do
not rev the engine up.
Only use the device in the recommended position
and only on a firm flat surface.
Do not operate the device on paved or gravel sur-
faces where ejected material may cause injury.
Check that the shredder, shredder screws and other
fastenings are securely fastened.
Replace worn or damaged blades and bolts in sets to
preserve balance;
Only replace cutting unit in pairs.
Damaged or illegible security stickers must be
replaced.
Do not use the appliance in bad weather, especially
when there is a risk of storm.
Before starting the machine, make sure that the
feeder is empty.
Keep your face and body away from the feeding
chute.
Hands, other parts of the body or clothing must not
be placed in the feeder, in the ejection channel or
near moving parts.
Do not use the appliance if you are tired, ill, under
influence of drugs, alcohol drinks or medicaments.
Do not overreach. Keep proper footing and balance
at all times.  Provide a safe posture, especially on
slopes.
When feeding material, never stand on a level higher
than the level of the base of the device.
Keep a distance from the ejection opening at all
times.
When feeding material into the device, be extremely
ENGLISH
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gh 11.7-1009440794409

Table des Matières