Honda Power Equipment HSS760A Manuel De L'utilisateur page 59

Loading
1.Press the height adjust lever, and push the handlebar down to raise
the auger to the HIGH position (track type) (see page 22).
2.Lower the discharge chute all the way down by operating the chute
joystick control (engine must be running for operation).
3.Use reverse gear to back the snow thrower up the ramp.
4.Use extreme care not to hit the discharge chute against the hood or
any other parts of the truck.
• Avoid stopping the snow thrower on the ramp. Should the engine
stop, be sure to move the shift lever back to the NUETRAL before
attempting to restart the engine.
DOWN
UP
56
REVERSE
1.5 m minimum
headroom
H
L