3.In cold weather or when the engine is cold, follow the procedures
below.
Move the throttle lever to the CHOKE position.
THROTTLE LEVER
4.Turn the engine switch to the ON position.
ON
5.Pull the starter grip lightly until you feel resistance, then pull briskly
in the direction of the arrow as shown below.
CAUTION:
• Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
• Damage may result if the starter grip is pulled while the engine is
running.
• Pull the starter rope toward the control panel.
CHOKE
ENGINE SWITCH
(ET, EW)
(ETD, EWD)
ON
START
29