7. SNOW THROWER OPERATION
Before operating this equipment you should read and understand the
SAFETY INSTRUCTIONS on page 3 through 8.
1.Start the engine according to the procedures described in page 28 or
32.
2.Move the throttle lever to the FAST position for normal operation.
''N'' (Neutral)
SLOW
FORWARD
FORWARD
FAST
FAST
REVERSE
SLOW
FAST
NEUTRAL
SLOW
FAST
REVERSE
NOTE:
Low speed is recommended for removing deep or hard-packed snow.
Track models:
3.Set the auger housing to the appropriate position (See page 22).
4.Fix the throwing direction by using the chute joy stick (See page 15).
37