3.Rotate the fuse holder cover and pull the fuse out.
4.Replace the fuse with a fuse of the same type and rating.
Specified fuse:
FUSE (5 A)
FUSE HOLDER
COVER
CAUTION:
• If frequent fuse failure occurs, determine the cause and correct the
problem before attempting to operate the snow thrower further.
• Never use a fuse with a different rating from that specified. Serious
damage to the electrical system or fire may result.
5.Install the fuse holder cover.
6.Install the battery cover by holding the bottom of the grommet and
firmly squeezing the front side of the cover to engage each pin into
the grommets.
54
5 A
HSS760A EWD, ETD
COVER PIN
GROMMET