Honda Power Equipment HSS760A Manuel De L'utilisateur page 24

NOTE:
Adjust the skid plates equally on both sides.
Be sure to tighten the skid plate and scraper bolts securely after
making adjustments.
TORQUE: 26.5 N•m
CAUTION:
Do not use the snow thrower on rough or uneven surfaces with the
auger ground clearance set for hard snow or surfaces.
This may cause serious damage to the snow blowing mechanism.
Wear inspection
If the thickness of the skid contacting the ground surface is 0.5 mm,
turn the skid upside down.
Replace the skid if the thickness is less than 1.0 mm after turning the
skid upside down.
21