dirna Bergstrom bycool FLAT CONCEPT Instructions De Montage page 18

CONCEPT
EN
14 Fasten tank on support (or floor) with
straps.
A- connect hoses, boxes and water faucet.
(*) Only connection for electric valves.
return hose
water faucet
A
CONNECTION TUBE
deposit
1 Position black tube Ø9 x Ø13 in the indicated
safety adapter, in order to prevent the water
entering the vehicle should the float fail.
2
Take out the other end of the tube towards the
outside of the vehicle.
3
Position the supplied drainage valve.
14 B- Cut original hose from cold water tank and
insert "T" (Ø8 or Ø10 according to hose), to
connect to provided black hose. Fasten using
(3) Ø12 clamps.
C- Both hoses marked with tape go to "Y" of tank
return hose.
water inlet
outlet to pump
WATER-DRAINAGE
14
in
1
14
18
Air conditioning for vehicles
*
3
"T"
original
B