dirna Bergstrom bycool FLAT CONCEPT Instructions De Montage page 16

CONCEPT
EN
8 To lead hoses and cables (from roof to water
tank), use original downpipes.
If it is not possible:
a- Present provided downpipe to most convenient
part and drill hole in centre, upwards.
b- Cut according to measures, from roof and using
previously mentioned hole as reference.
9 Fasten downpipe with Ø3.5x13 sheet thread
screw and cut where necessary, depending on
required length.
9
10 From roof, lead the (3) hoses and (2) cables
downwards.
A- Present both white grooves at 90º and cut
where they meet hole.
B- Once hoses and cables have been led
along grooves, seal hole area using silicone
so as to leave hoses and cables in a fixed
position.
8
8b
9
16
Air conditioning for vehicles
35/38
B
8a
19/21
10
A