Cleaning - Oregon PS600 Manuel D'instructions

Cleaning

CAUTION: When cleaning the powerhead
and attachments, do not immerse in water or
other liquids. Do not use a pressure washer to
clean the powerhead and attachments.
• Remove the battery
• Remove any debris from the intake screen to
ensure unrestricted airflow
• Clear any debris from the battery port and wipe
the contacts
• Wipe dust and clippings from the pole saw
BATTERY PACK
IMPORTANT: There are no user serviceable
parts inside the battery pack. Do not
disassemble.
Lithium ion batteries have a finite operating life
If the amount of use time per charge decreases
noticeably under normal use, the battery pack is
at the end of its useful life and should be replaced
• Make sure the battery pack, including the
contacts, is clean, dry, and has no signs of
puncture, impact, or other damage Broken
batteries can cause fires or emit hazardous
chemicals
• Clean dirty contacts with a soft, dry cloth Dirt
or oil can cause a poor electrical connection
resulting in loss of power
• Store battery with a full charge, on a charger
when possible
CHARGER
IMPORTANT: There are no user serviceable
parts inside the charger. Do not disassemble.
• Unplug the charger from the electrical outlet
• Clean dirty contacts with a soft, dry cloth
PS600 Multi-attachment
Operation and Maintenance
17