AmbiTrack sensors
Setting up your appliance without the app
3 Follow the instructions in the app to connect your appliance to the Wi-Fi
network. If you have trouble connecting your appliance, check the items
mentioned in the troubleshooting section (see 'Troubleshooting').
- If you previously chose to set up your appliance without the app, but
now want to connect your appliance to the app you press and hold the
Wi-Fi icon for 8 seconds. The access point mode icon will be shown on
the display
. Open the app on your smartphone to connect.
- If you have changed your Wi-Fi home network or changed your
password, you also need to press and hold the Wi-Fi icon for 8 seconds
. You will see the access point mode icon on the display
app on your smartphone to connect.
Note: Make sure your smartphone is connected to the Wi-Fi network you
use in your bedroom.
Note: The app on your smartphone and your connected Sleep & Wake-Up
Light can ONLY communicate with each other when both appliances are
connected to the same home Wi-Fi network.
Note: You cannot remotely control the device through the app (e.g. set an
alarm) if you are not connected to your home Wi-Fi network or if your
smartphone is connected to 4G.
This Wi-Fi connection issue icon might appear on the display if a connection
cannot be established. Check the troubleshooting section to solve the
problem.
The connected Sleep & Wake-Up Light collects input from its surroundings
through the AmbiTrack sensors. AmbiTrack sensors measure light, humidity,
temperature and sound pressure. These factors can influence your sleep.
Only in the app you can see information on the recommended values for
ideal sleep conditions. The measurements of the sensors can be influenced
by the surroundings of the connected Sleep & Wake-Up Light.
For example, if you place the appliance next to a window or near a heating
source such as a radiator, the temperature and humidity sensors might not
represent the temperature / humidity of the entire room.
You can set up the Sleep & Wake-Up Light without the app. Before you can
use the appliance, a setup wizard on the appliance needs to be completed
first. You can connect the appliance to the app later (see 'Easy Wi-Fi setup').
We strongly recommend you to set up your appliance with the SleepMapper
app in order to enjoy all functionalities the app offers.
English
11
.Open the