Using The Appliance As A Reading Light; Midnight Light; Settings - Philips HF367X Série Mode D'emploi

English
14

Using the appliance as a reading light

Midnight light

Settings

You can use the connected Sleep & Wake-Up Light as a reading light.
Press the reading light icon on the display to switch on the reading light.
Note: You can increase and decrease the brightness intensity. You can select
a brightness between 1 (low) and 25 (high). The default brightness setting is
18.
To switch off the light, press the cross icon in the menu.
Tip: When the light is on, you can also turn off the light with a single tap on
the top of the appliance. All active programs will stop. Set alarms are still
active.
If you wake up during the night, you can tap the top of the appliance to
activate a dim light. This dim, subtle orange light provides you with just
enough light to find your way in the dark. Switch off the Midnight light by
tapping the top of the appliance again.
Note: The Midnight light cannot be activated directly when the main light is
already on. In that case, first tap the top of the appliance to deactivate the
main light. Then tap again to activate the Midnight light.
In this menu, you can adjust the clock time, the audio feedback, the display
brightness of the appliance and enable/disable Wi-Fi.
Note: Press and hold the settings icon for 8 seconds to open a new menu, in
which you can select DEMO mode (accelerated wake-up curve) or VERSION
(firmware version of the appliance).
If you have updated the appliance through connection to the app, the
information in this document may not be up to date. Find the latest user
manual on www.philips.com/support
Philips reserves the right to update the firmware of the appliance.