Start-Up; Safety Instructions; First Cleaning; First Water Change - Boneco H680 Mode D'emploi

12

START-UP

en

SAFETY INSTRUCTIONS

Before using the device, carefully read through the
enclosed safety notes and operating manual and
keep them for later use.

FIRST CLEANING

Production-related residue on the water tray and water
tank may lead to foaming, and thereby to water escaping.
For this reason, before the first use, both elements must
be cleaned with warm water and dishwashing detergent
(see Figure 5 on the right side). Thoroughly rinse the parts
under running water.

FIRST WATER CHANGE

24 hours after the first use, the "Water change" symbol
will illuminate:
Change the water in the water tank and in the water base.
The "Water change" symbol will automatically go out as
soon as the water has been replaced.