Particle Sensor; Assembling The Appliance - Boneco H680 Mode D'emploi

32
GENER AL CLE ANING (CONTINUED)
en

PARTICLE SENSOR

The particle sensor detects the amount of dirt in the air in
the room by analyzing a passing air flow. Over time, dirt
can accumulate and affect measuring accuracy.
The flap over the particle sensor has to be closed during
operation to ensure the measurement is correct. It should
only be opened to clean the sensor.
1. Clean the sensor lens using a damp cotton swab.
2. Dry the sensor with a dry cotton swab.

ASSEMBLING THE APPLIANCE

Once cleaning is complete, you can put the BONECO
H680 back together. When doing so, pay attention to how
the evaporator mat fits.