Stop; Power Off - ECOVACS ROBOTICS WINBOT8 Mode D'emploi

3. Operating the Robot

3.9 Stop

When WINBOT 8 completes its cleaning cycle, it returns to the place it started and beeps.
1 Remove WINBOT 8
Grasp WINBOT 8's Handle. Press and
hold for approximately 5 seconds and
the fan will stop. Remove WINBOT 8
from the window. Polish away any marks
left on the glass from WINBOT's removal
with the provided Finishing Cloth.
Remove the Safety Pod, if used.
3
If WINBOT 8 has a problem and the Indicator Light glows RED, it can be reset by pressing
*
the Reset Button on the Remote Control.
12
EN
2

Power OFF

Move the Power Switch to the "
OFF
Unplug WINBOT 8
4
o
" position.