Place Safety Pod; Spray Cleaning Solution - ECOVACS ROBOTICS WINBOT8 Mode D'emploi

3.5 Place the Safety Pod
The Safety Pod MUST be placed
on the inside of the window.
Press the Safety Pod FIRMLY on the inside
of the window being cleaned. Make sure
the Safety Pod is attached and securely in
place.

3.6 Spray Cleaning Solution

WINBOT should only be used with WINBOT Cleaning Solution. Using other cleaners
*
significantly reduces WINBOT's performance and can damage the robot.
Spray the upper and lower sides of the
Cleaning Pad with the provided WINBOT
Cleaning Solution 5 times each.
3. Operating the Robot
After spraying, wipe the bottom of WINBOT 8
with the provided Finishing Cloth.
9
KO EN