Attach Cleaning Pad; Assemble Power Adapter; Install Safety Tether - ECOVACS ROBOTICS WINBOT8 Mode D'emploi

3.2 Attach the Cleaning Pad
Turn WINBOT 8 over and attach the Cleaning
Pad to the Velcro smoothly. Make sure the
Cleaning Pad is placed exactly within its Velcro
area and does not cover the Fan or Edge
Detection Sensors.
3.4 Install the Safety Tether
If WINBOT is used to clean an outside window, the Safety Pod and Tether
MUST be used.
If WINBOT 8 is being used to clean an inside window please skip to step 3.6.
*
A
C
End A: Robot Power Cord
End C: Safety Pod
3. Operating the Robot
3.3 Assemble the Power Adapter
D
End B: Power Adapter Power Cord
End D: Safety Tether
B
D
7
KO EN