Stop; Power Off - ECOVACS ROBOTICS Winbot 9 Mode D'emploi

3. Operating the Robot

3.9 Stop

When WINBOT 9 completes its cleaning cycle, it returns to the place it started and beeps.
Remove WINBOT 9
1
Grasp WINBOT 9's Handle. Pull the Air
Release Trigger and remove WINBOT 9 from
the window. Polish away any marks left on
the glass from WINBOT 9's removal with the
provided Finishing Cloth.
Remove the Safety Pod, if used.
3
If WINBOT 9 has a problem and the Indicator Light glows RED, it can be reset by pressing
*
the Reset Button on the Remote Control.
12
EN EN

Power OFF

2
Move the Power Switch to the "O" position.
Unplug WINBOT 9
4