Stop; Power Off - ECOVACS ROBOTICS WINBOT 850 Mode D'emploi

3. Operating WINBOT 8

3.9 Stop

When WINBOT 8 completes its cleaning cycle, it returns to the place it started and beeps.
Remove WINBOT 8
1
Grasp WINBOT 8's Handle. Press and
hold for approximately 5 seconds and
the fan will stop. Remove WINBOT 8
from the window. Polish away any marks
left on the glass from WINBOT's removal
with the provided Finishing Cloth.
Remove the Safety Pod.
3
Polish away any marks left on the glass
from the Safety Pod's removal with the
provided Finishing Cloth.
* If WINBOT 8 has a problem and the indicator Light flashes RED, it can be reset by pressing the
RESET Button on the Remote Control. See "Troubleshooting" for details.
14
EN

Power OFF

2
Move the Power Switch to the "
Unplug WINBOT 8
4
o
" position.