Sennheiser evolution wireless Série Notice D'emploi page 83

TUNE
tune
80
Configuring a frequency memory
Transmitters and receivers of the Sennheiser evolution wireless series ew 500
have 16 switchable frequency memories (presets) respectively to store up to
16 transmission/receiving frequencies with their respective channel numbers
(from 0 to 255). With the EM 500 receiver, each frequency memory can
additionally be assigned a name.
You can directly switch between the fixed frequency memories (presets)
(u "Selecting a frequency memory – selecting the frequency, channel number,
name (EM 500 only)").
Setting the transmission/receiving frequency
Transmission and receiving frequencies are tunable in 25-kHz steps within a
switching bandwidth of 32 MHz max.
Special notes on multi-channel operation:
Several devices of the Sennheiser evolution wireless series ew 500 can be used
simultaneously on different frequencies. The factory-preset frequencies are
intermodulation-free. Before you program new frequency combinations, please
refer to the information on the correct frequency choice given in the planning
brochure "Practical Applications in RF Technology" which your local
Sennheiser agent has in stock or will be pleased to order for you from
Sennheiser.
Select the frequency memory for which you wish to set a frequency
(u "Selecting a frequency memory").
Select the "TUNE" menu by pressing the
appears on the display; after a short pause the currently set frequency
is displayed.
With the buttons you can now select a different frequency. The
/
frequencies are tunable in 25-kHz steps. The new frequency starts
flashing on the display and becomes effective immediately.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
button until "TUNE"
SET