First Time Installation; Input Selection; Basic Operations; Operation With The Buttons On The Tv - Tech Line TL-26LC740 Mode D'emploi

First Time Installation

When the TV set is operated for the fi rst time, the
following menu screen will be displayed:
Select your Country, Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
The following menu will be displayed during the
automatic tuning:
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the programme
names, you can change them via the program table.
Do not turn off the TV while initializing time
installation.
02_MB45M_[GB]_1810UK_ANALOG_NICKEL13_26740W_10067855_50165425.indd 32 02_MB45M_[GB]_1810UK_ANALOG_NICKEL13_26740W_10067855_50165425.indd 32

Input Selection

Once you have connected external systems to your TV,
you can switch to different input sources.
• Press "SOURCE" button on your remote control for
directly changing sources.
or
• Select "Source" option from the main menu by
using " " or " " button. Use then "
" " button to highlight an input and press " " button
to select.
Note : You can mark desired source options by pressing the
OK button. Therefore, when
only the marked source options will be available (except for
the TV source).

Basic Operations

You can operate your TV using both the remote
control and onset buttons.

Operation with the Buttons on the TV

Volume Setting
• Press " " button to decrease volume or
button to increase volume, so a volume level scale (slider)
will be displayed on the screen.
Programme Selection
• Press " P/CH + " button to select the next programme or " P/
CH - " button to select the previous programme.
Viewing Main Menu
•Press " "/ "
main menu. In the Main menu select sub-menu using " P/
CH - " or " P/CH + " buttons and enter the sub-menu using
" " or "
menus, refer to the menu system sections.
AV Mode
• Press the " TV/AV " button in the control panel on the TV
to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control all
the functions of the model you selected. The functions
will be described in accordance with the menu system
of your TV.
English - 32 -
"SOURCE"
button is pressed,
" buttons at the same time to view
" buttons. To learn the usage of the
02.03.2010 16:57:22 02.03.2010 16:57:22
" or