Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - Tech Line TL-26LC740 Mode D'emploi

Table des Matières

Les langues disponibles

Viewing the Connections - Side Connectors

1. Component Video Inputs (YPbPr) are used for connecting component

video.You can connect the component video and audio sockets with

a device that has component output. Connect the component video

cables between the COMPONENT VIDEO INPUTS on on the TV and the

component video outputs of your device. While connecting, be sure that the

letters on your TV, " Y ", " Pb ", " Pr " correspond with your device's connectors.

IMPORTANT:Please do not connect a device to PC socket while using YPbPr input.

Video Input is used for connecting video signals of external devices.Connect

the video cable between the VIDEO IN socket on the TV and the VIDEO

OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable PC/YPbPr sound connection in such a case, use an

appropriate audio cable between the connected device's audio outputs and

the TV's audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable

you should also connect your device with an audio cable to the AUDIO

INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the

system. Connect to the HEADPHONE jack to listen to the TV from headphones.

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

02_MB45M_[GB]_1810UK_ANALOG_NICKEL13_26740W_10067855_50165425.indd 29

English - 29 -

02.03.2010 16:57:19

Table des Matières

Table des Matières