PRESIDENT Randy III Manuel D'utilisation page 11

3) CHANNEL SELECTOR: t/s keys
- Press the t (3) key to decrease a channel.
- Press the s (3) key to increase a channel.
A «beep» sounds each time the channel changes if the KEY BEEP
function is activated. See § KEY BEEP page 17.
4) CTCSS/DCS ~ MENU
CTCSS/DCS
For simplicity, in this manual we will speak of CTCSS/DCS code
to indicate both a CTCSS tone and a DCS code, of GENRE to
indicate the kind of code (CTCSS, DCS or OFF = no code). TYPE
indicates whether this is a TX transmission or an RX reception and
MODE specifies the operating mode, Identical I d or different DF.
See CODE SET menu page 20.
See list of codes on pages 62 to 64.
Note: Codes can only be used in FM. Each channel can have
its own code.
Press the CTCSS/DCS key (4) to activate/deactivate a stored
code.
Activation
If a CTCSS/DCS code has been stored, it becomes active, "CTCSS"
or "DCS" icon is displayed on the screen.
In MODE I d, if no CTCSS/DCS code has been stored, the device
emits an error beep. Go to the CODE SET menu to store a CTCSS/
DCS code.
In DF MODE, if no CTCSS/DCS code has been stored in either TYPE
TX or TYPE RX, the device emits an error beep. Go to the CODE
SET menu to store the CTCSS/DCS codes.
Deactivation
If a CTCSS/DCS code has been stored and "CTCSS" or "DCS"
is displayed on the screen, a short press on the CTCSS/DCS key
(4) deactivates the stored cde, "CTCSS" or "DCS" disappears, a
deactivation beep sounds. The memorized CTCSS/DCS code is
kept in memory but no longer functions.
MENU
(long press)
1. Long press the MENU key (4) to enter the MENU.
the display.
(short press)
11
appears on