PRESIDENT Randy III Manuel D'utilisation page 18

Note: If level 03 is selected, the transmitting power automatically
changes to L (low). The H (high) power remains available but will
be reseted to L if the device is switched off and then on again.
See HI/LO TRANSMITTING POWER page15.
5) TONE
This function allows to adjust the reception tone.
1. Long press the MENU key (4) to enter the MENU.
the display.
2. Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4.
Press the s or t key (3) to select between the 11 levels from -5
to 5.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is 0.
6) EMG SETTING
This function allows to customise both emergency channels.
1. Long press the MENU key (4) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current order of the
emergency channels binks.
4. Press the s or t key (3) to change the emergency to be set, or...
5. Short press the MENU key (4) to validate. The current channel
blinks.
6.
Press s or t key (3) to select the channel.
7. Short press the MENU key (4) to validate the channel. The mode
blinks: AM, FM or FM UK (in U configuration only).
8.
Press s or t key (3) to select the mode.
9. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
10. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
The default priority channels are channel 09 AM (1) and channel
19 AM (2) respectively.
menu.
18
appears on
appears on
menu.