Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Ventilation
The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the ventilation lever to the OPEN position.
The damper is opened and room air is drawn out.
CLOSE
Before using the ventilation feature,
NOTICE
position the lever, as shown. First, pull down
part
to horizontal line with part

Air Direction

VENT
OPEN
Part A
.
The direction of air can be controlled wherever you
want to cool by adjusting the horizontal louver and the
vertical louver.
• HORIZONTAL AIR-DIRECTION CONTROL
To control horizontal direction of air flow, set to the
ON position the air-swing switch and the air flow will
be swept horizontally by the automatic air-swing
system.
If you want to stop the air flow from moving, switch off
the air swing switch at the desired position of the
vane.
• VERTICAL AIR-DIRECTION CONTROL
The vertical air direction is adjusted by moving the
horizontal louver.
The direction of air can be controlled wherever
you want to cool by adjusting the horizontal
louver and the vertical louver.
• HORIZONTAL AIR-DIRECTION CONTROL
The horizontal air direction is adjusted by
rotating the vertical louver right or left.
• VERTICAL AIR-DIRECTION CONTROL
The vertical air direction is adjusted by rotating
the horizontal louver forward or backward.
Operating Instructions
Part B
Owner's Manual 19

Publicité

Chapitres

Table des Matières
loading

Table des Matières