Safety Considerations; Technical Data - Dustcontrol DC 5800a Mode D'emploi

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
risk of fi re, electric shock and personal injury, including
the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the material you
are working with ie asbestos. Don´t use the machine
for purposes that it isn´t intended for.
3. Body injuries
Never let the suction come in contact with parts
of the body. Th e strong suction eff ect can hurt the
blood-vessels in the skin. Do not repair the electric
components yourself, get somebody qualifi ed. Faults
may cause injury. See also below under warnings.

TECHNICAL DATA

HxWxL
Weight
Inlet
Collecting sack
Hose length (φ 50)
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter
Degree of separation
(EN 60335-2-69-Class M) 99,9 %
Filter area, microfi lter
Degree of separation,
microfi lter (EN 1822-1)
(EN 60335-2-69, Class H) > 99.995 %
Sound level */
*/Sound level at 1.6 m height and 1 m distance according to
DIN EN ISO 3744 in free space and at maximum airfl ow.
followed to reduce the
50 Hz 60 Hz
1920x760x1000 mm
ca 170 kg ca 190 kg
φ 76 mm φ 76 mm
75 l 75 l
5-30 m 5-30 m
470 m3/h 600 m3/h
28 kPa 30 kPa
5/5.5 kW 7.5 kW
8.4 m2 8.4 m2
99,9 %
2.5 m2 2.5 m2
HEPA H13 HEPA H13
> 99.995 %
< 75 dB(A) < 75 dB(A)
DC 5800a 5 kW - 8
4. Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-
larly if damage.
5. Important measure
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
6. Maintain the machine with care
Keep machine clean and check that the hose is enti-
red and that all gaskets are tight. Follow instructions.
Keep handles dry and free from oil and grease.
7. Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
8. Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue.
Capacity
kPa
40
20
5 kW
100 200
7.5 kW 60 Hz
300 400 500 m 3 /h
Part No 9481