Safety Considerations; Technical Data - Dustcontrol DC 2800w Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Safety Considerations

Read all instructions before attempting to operate
this machine and save these instructions.
Warning! When using electric machines, basic
safety precuations should always be
reduce the risk of fi re, electric shock and personal
injury, including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with
parts of the body. The strong suction effect can
hurt the blood-vessels in the skin. Don´t repair
the electric components yourself, get some-
body qualifi ed. Faults may cause injury. See
also below under warnings.

TECHNICAL DATA

HxWxL (mm)
Weight
Vacuum inlet
Hose length recommended
Negative pressure, max
Air-fl ow at open inlet
Vacuum motor, 1 phase
Pump, 1 phase
Container volume
Pump lift height
Water hose connection
Pump capacity
Particle capacity
Sound Level
2008-08-05
4. Don´t abuse cord
followed to
5. Important measure
6. Maintain the machine with care
7. Checking of damage
8. Warning
950x540x605 mm
37 kg
X50 mm
5 m (Ø50)
21 kPa
3
190m
/h
1200 W, 115/230V
420 W
75 litres
7 metres
1" hose barb
175 litres/minute
max 10 mm
75 dB(A)
DC 2800w, 8
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.
With cleaning and maintenance on the mach-
ine, the power cable should be dis-connected
from the supply.
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
Before futher use of the machine it should be
carefully checked that the machine is unda-
maged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
Never tip the unit with fl uid in the container.
(Fluid can enter the motor.)
Vacuum producer
capacity
kPa
25
20
15
10
5
0
50 100 150 200 m
3
/h
Part No 9474

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

9474

Table des Matières