Safety Considerations; Technical Data - Dustcontrol DC 1800 Manuel D'instruction

Safety Considerations

Read all instructions before attempting to operate
this machine and save these instructions. If not this
safety consideration follows the guarantee is not
valid and personal injury and machine damage can
be caused.
Warning! When using electric machines, basic safety
precuations should always be followed to reduce
the risk of fi re, electric shock and personal injury,
including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it
in damp or wet locations or in presence of fl am-
mable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos. Don´t
use the machine for purposes that it isn´t intended
for.
3. Body injuries
Never let the suction come in contact with parts
of the body. The strong suction effect can hurt the
blood-vessels in the skin. Don´t repair the electric
components yourself, get somebody qualifi ed.
Faults may cause injury. See also below under
warnings.
4. Don´t abuse cord

TECHNICAL DATA

HxWxL
Weight
Inlet
Hose length
Collecting sack, container
Flow, max
Neg. pressure, max
115/230 V
Power consumption
115/230 V
Fine fi lter polyester, area
Degree of separation
Fine fi lter (EN 60335-2-69, M)
Filter area, microfi lter
Degree of separation,
microfi lter
(EN 1822-1, HEPA H13)
(EN 60335-2-69, H)
Sound level
DC 1800
5. Important measure
6. Maintain the machine with care
7. Checking of damage
8. Warning
740x380x380 mm
10 kg
φ 50 mm
5 m
560x700 mm/20 l
3
190 m /h
21/24 kPa
1200 W/ 1400 W
2
1.5 m
99,9%
0.85 m 2
99,995 %
68 dB(A)
9
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable
regularly if damage.
With cleaning and maintenance on the machine,
the power cable should be dis-connected from
the supply.
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from oil
and grease.
Before futher use of the machine it should be ca-
refully checked that the machine is unda-maged.
If there are any damaged parts these should be
repaired by of a Dustcontrol authorized service
center.
Use only accessories and replacable parts which
are available in Dustcontrol catalogue. Note! If
you use wrong spare parts (fi lter and collection
sacks) the machine can leak hazardous dust
which can cause personal injury. The handle
on the top of the machine can only be used by
manual power and empty container. The machine
in constructed for a maximal totalweight of
40 Kg. Higher loading can cause damage.
Vacuum producer
capacity
kPa
20
1400 W
15
1200 W
10
5
0 50 100 150 200 m 3 /h
Part No 94114