Snapper RDLT Série Manuel De L'opérateur page 18

Mower lift lever
This controls the mower cutting height. Pull lever to lower the
height and pull up to raise the height. The cutting height is ad-
justable between 2,5 cm (1,0") and 8,9 cm (3,5").
Catcher Open/Close Lever
This opens the catcher so that it may be emptied and closes
it for mowing. To empty the catcher, extend the grass catcher
handle and pull forward on the handle. To close, push the
lever backward until the catcher closes and locks. Release
the grass catcher handle.
18
Transmission Release lever
This deactivates the transmission so that the tractor can be
pushed by hand. See Pushing the Tractor By Hand.