Dometic Frigo Notice D'utilisation page 8

Operation
The display indicates the system status.
I
NOTE
The symbols
but have no function.
Item Symbol Description
1 –
2
.
3
4 °C
°F
5
9
10
11
12
8
and are displayed when the system is switched on,
Function description
Minus sign – Display of a temperature value below 0 °C
Temperature – Display of the current temperature
– Displays additional information:
Decimal point – Displayed when decimal temperatures are dis-
– Displayed when the cooling system is switched off
Unit of – °C: Display in degrees Celsius
measurement – °F: Display in degrees Fahrenheit
temperature
Blower – Displayed when the evaporator blower is on
– Flashes if the activation of the blower is delayed
– Flashes in heating mode
Alarm – Displayed when there is a temperature alarm
Defrosting – Displayed in defrosting mode
– Flashes during the drip period
Compressor – Displayed when the compressor is operating
– Flashes in heating mode
Information – Displays the target temperature
– Displays additional information:
(with a minus sign when combined with a temper-
ature below 0 °C)
SEr: Maintenance due
played
(see chapter "Fault messages" on page 21)
(with a minus sign when combined with a temper-
ature below 0 °C)
SEt: The target temperature can be set
Frigo
EN