Rear - Toa WT-D5800 Mode D'emploi

7. Up/Down keys
Select the setting items displayed on the
LCD screen (5).

[rear]

9 10 11 12 13
ANT B
IN OUT
9. antenna inputs a and B
75 Ω, BNC
For the wireless system covering a
relatively narrow area, use the supplied two
rod antennas, which should be set up at a
45° angle outwards from a vertical line.
10. antenna distribution outputs a and B
75 Ω, BNC
Output the same signals as those which are
input to Antenna inputs A, B (9). Used for an
RF cascade connection.
11. Dc input jack
Connect the power cable of the supplied
AC adapter or equivalent to this jack.
12. cable hanger
Hook the power cable onto this part.
Power cable
14
OUTPUT
CONTACT
( UNBALANCED
OUTPUT
DC IN
0.5A max
( )
Cable hanger
8. volume control
Adjusts an output level.
15 16
( )
BALANCED
600Ω MIX IN 10kΩ
( )
) ( UNBALANCED
LEVEL
LINE MIC
-20dBV -60dBV
13. contact output terminal
Push-type terminal block
Depending on the state of the microphone,
the make contact is output.
14. aF output
–20 dB*/–60 dB* selectable, unbalanced,
phone jack.
15. aF output level selector
Sets the output level from the AF outputs
by selecting either MIC (–60 dB*/600 Ω) or
LINE (–20 dB*/600 Ω).
16. aF output
–20 dB*/–60 dB* selectable, balanced, XLR
connector, male type (pin #2: Hot)
17. aF mixing input
–20 dB*, 10 kΩ, unbalanced, phone jack.
Connects to other unit's AF output.
17 10
ANT A
( )
)
-20dBV
OUT
* 0 dB = 1 V
9
IN
7