How To Check And Deal With Interference - Toa WT-D5800 Mode D'emploi

10. HOW TO cHeck aND Deal WiTH iNTerFereNce

[Order of actions (action Flowchart)]
Change bank/channel numbers to those of idle channels.
(See p. 12, "Bank number setting" and p. 12, "Channel
number setting.")
Check reception indicators.
Perform antenna attenuator settings to limit service area.
(See p. 18, "Antenna attenuator (ANT ATTEN) setting.")
Check reception indicators.
Perform optional antennas' attenuator switch settings to
limit service area.
(See the instruction manual of optional antennas.)
Check reception indicators.
24
Any interference?
Note
Most interference can be avoided by operations
above. If interference is still encountered, select
Yes
channel having relatively less interference, then
continue following operations.
Any interference?
Yes
Any interference?
Yes
To the next page
No
Use as is.
No
Use as is.
No
Use as is.