Function Settings; Placing The Unit In Setting Mode; Setting Items Displayed On The Lcd Screen In Setting Mode - Toa WT-D5800 Mode D'emploi

8. FUNcTiON seTTiNgs

Settings are performed in setting mode.
[keys used in setting mode]
WT-D5800
AF PEAK
ANT A
ANT B
PC

8.1. Placing the Unit in setting Mode

step:
Press the Set key for about 1 second.
The unit is placed in setting mode.
The normal operating state
A – 1
R F A
B

8.2. setting items Displayed on the lcD screen in setting Mode

The display cycles through the indications "BANK," "CHANNEL," "ENCRYPTION," "CODE,"
"PAIRING," "FBS," "ANT ATTEN," "EQ PRESET," "CONTACT OUT," "CHANNEL SCAN," "LCD
CONTRAST," "MODEL INFO" and "EXIT" with each depression of the Up key, or the Down key for
the reverse action.
Notes
• The "CODE" indication is not displayed while the Encryption Function is enabled.
• The "PAIRING" indication is not displayed while the Encryption Function is disabled.
μV 10 30 100 300 500
DIGITAL WIRELESS RECEIVER WT-D5800
8 8 8 . 8 2 5 M H z
A F
Pressed for about 1 second
LCD screen
SET
dB -36 -27 -18 -9 0
Set key
SET
Up key
0 10
VOLUME
Down key
Setting mode
M E N U
> B A N K
POWER
11