Toa WT-D5800 Mode D'emploi page 13

8.3.3. encryption setting
This setting enables the Encryption Function, which prevents the contents of communications
between the WT-D5800 unit and the microphone from being read externally.
Notes
• Complete the bank and channel settings for the WT-D5800 unit and the microphone before
performing the encryption setting.
• Be sure to perform pairing setting (see p. 14) after the Encryption Function has been enabled.
The Encryption Function will not work properly if the WT-D5800 and the microphone are not
properly associated with each other by way of the pairing setting.
step 1. In setting mode, select the setting item "ENCRYPTION" with the Up or Down key.
step 2. Press the Set key, and the LCD screen displays the current setting.
step 3. Select "ON" or "OFF" with the Up or Down key.
Note
When leaving the setting unchanged, select "EXIT" with Up or Down key and press the Set
key. Then, the display returns to the "ENCRYPTION" indication.
step 4. Press the Set key to register the setting.
This terminates the encryption setting, and the display returns to the "ENCRYPTION"
indication.
step 5. When any other setting is not needed, select "EXIT" with the Up or Down key and press the
Set key.
The unit returns to the normal operating state.
Note
When another setting is needed, select the necessary setting item with the Up or Down key
and press the Set key.
Tip
The lock icon is displayed on the LCD screen when the Encryption function is enabled.
13