Safety Precautions - Toa WT-D5800 Mode D'emploi

1. saFeTY PrecaUTiONs

• Before installation or use, be sure to carefully read all the instructions in this section for
correct and safe operation.
• Be sure to follow all the precautionary instructions in this section, which contain important
warnings and/or cautions regarding safety.
• After reading, keep this manual handy for future reference.
WarNiNg
Indicates a potentially hazardous situation
which, if mishandled, could result in death
or serious personal injury.
When installing the Unit
• Do not expose the unit to rain or an
environment where it may be splashed by
water or other liquids, as doing so may
result in fire or electric shock.
• Use the unit only with the voltage specified
on the unit. Using a voltage higher than
that which is specified may result in fire or
electric shock.
• Do not cut, kink, otherwise damage nor
modify the power supply cord. In addition,
avoid using the power cord in close
proximity to heaters, and never place heavy
objects -- including the unit itself -- on the
power cord, as doing so may result in fire or
electric shock.
• Avoid installing or mounting the unit in
unstable locations, such as on a rickety
table or a slanted surface. Doing so may
result in the unit falling down and causing
personal injury and/or property damage.
• Since the unit is designed for indoor use, do
not install it outdoors. If installed outdoors,
the aging of parts causes the unit to fall
off, resulting in personal injury. Also, when
it gets wet with rain, there is a danger of
electric shock.
When the Unit is in Use
• Should the following irregularity be found
during use, immediately switch off the
power, disconnect the power supply plug
from the AC outlet and contact your nearest
TOA dealer. Make no further attempt to
operate the unit in this condition as this
may cause fire or electric shock.
· If you detect smoke or a strange smell
coming from the unit
· If water or any metallic object gets into the
unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged
(exposure of the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds)
· If it is malfunctioning (no LCD indication
appears)
• To prevent a fire or electric shock, never
open nor remove the unit case as there
are high voltage components inside the
unit. Refer all servicing to qualified service
personnel.
• Do not place cups, bowls, or other
containers of liquid or metallic objects on
top of the unit. If they accidentally spill into
the unit, this may cause a fire or electric
shock.
• Do not insert nor drop metallic objects or
flammable materials in the ventilation slots
of the unit's cover, as this may result in fire
or electric shock.
• Do not touch a power supply plug or
antenna during thunder and lightning, as
this may result in electric shock.
• To prevent the electromagnetic wave from
badly influencing medical equipment, make
sure to switch off the unit's power when
placing it in close proximity to the medical
equipment.
3