Amprobe AM-500 Mode D'emploi page 23

Replacing FUSE follow below steps:
1. Disconnect the test lead probe from measuring
circuit.
2. Turn the Meter to OFF position and remove the
holster.
3. Remove the screws from the enclosure and open
the enclosure.
4. Remove the broken fuse and replace with new
specified fuse.
5. Put the enclosure back and re-fasten the screw.
Fuse:
mA /μA input:
F1 fuse, 0.2A H 250V fast-fuse, ( 5×20)mm
10 A input:
F2 fuse, 10A H 250V fast-fuse, ( 6×32)mm
F1
F2
16