Dometic 10 Série Notice D'utilisation page 25

Masquer les pouces Voir aussi pour 10 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RMDT10
• The display switches on briefly every 15 seconds. This indicates that the refriger-
ator is on.
• If there is a pending error message, the display switches on permanently.
Stand-alone gas mode is
The batteries of the battery packs must be replaced when the error "E14" is dis-
played.
6.9
Fan operation (optional)
For fan operation the optional fan must be installed.
When switching on the device, the fan is switched on for a short time (function test).
During the device's operation the fan only switches on:
• When the ambient temperature is above 32 °C.
• When the set cooling temperature is not reached within 2 hours.
• When the fan function is activated.
I
NOTE
In delivery state, the fan function is activated.
The fan operation is indicated by the symbol
6.10
Setting the cooling capacity
I
NOTE
For ambient temperatures of +15 °C to +25 °C, select the average cool-
ing capacity.
➤ Select the desired temperature level in the cooling capacity menu.
6.11
Using the refrigerator door/ice compartment door
!
CAUTION! – Beware of injury
• The refrigerator door or ice compartment door can completely
detach from the device if used incorrectly.
• Do not lean on the open refrigerator door.
EN
through symbols
indicated
Using the refrigerator
and
.
.
25

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Rmdt10.5tRmdt10.5xtRmd10.5tRmd10.5xt

Table des Matières