Preparation; Required Tools And Material - LIVARNO LUX 14101504L Instructions De Montage, D'utilisation Et Consignes De Sécurité

Never recharge non-rechargeable batteries and do not short-cir-
cuit and / or open any batteries.
Never throw batteries into fire or water.
Do not exert mechanical loads to batteries.
If the above instructions are not complied with, the batteries may
discharge themselves beyond their end voltage. There is then a
danger of leaking. In the event of a battery leak, immediately
remove it from the device to prevent damage.
Do not let the fluid from a leaking battery come into contact with
your skin, eyes or mucous membranes. In the event of contact
with battery acid, thoroughly flush the affected area with clean
water and seek immediate medical attention.
Avoid extreme environmental conditions and temperatures, e.g.
above radiators, as they may affect batteries.
Remove the batteries from the device if they have not been used
for a long period.
Only use the specified battery type!
When inserting the battery ensure the correct polarity! This is
shown in the battery compartment.
If necessary, clean the battery and device contacts before insert-
ing the battery.
Promptly remove used batteries from the product.

Preparation

Required tools and material

The tools and materials specified are not included. This information and
these values are non-binding and are only provided as a reference.
The nature of the material is determined by the individual local con-
ditions.
- Pencil / marking tool
- Screwdriver
- Electric drill
- Drill bit
- Spirit level
GB 39