Installing The Subwoofer Horizontally (Ht-Ct380 Only); Linking The System (Link To The Subwoofer) - Sony HT-CT380 Manuel D'instructions

Installing the subwoofer
horizontally (HT-CT380
only)
Place the subwoofer on the right side
with the "SONY" logo facing front.
Attach the supplied speaker pads.
GB
24
Linking the system (Link
to the subwoofer)
Set up the wireless subwoofer
connection again.
1
Press MENU.
2
Select [WS] with   (select), then
press ENTER.
3
Select [LINK] with   (select), then
press ENTER.
4
When [START] appears on the
display, press ENTER.
[SEARCH] appears, and the Bar
Speaker searches for a device that
can be used with Link. Proceed to
the next step within 1 minute.
To quit the Link function while
searching for a device, press BACK.
5
Press LINK on the subwoofer.
The on/standby indicator on the
subwoofer lights up in green. [OK]
appears on the display of the Bar
Speaker.
If [FAILED] appears, check to ensure
the subwoofer is turned on and
perform the process again from
step 1.
6
Press MENU.
The menu turns off.