Sony HT-CT380 Manuel D'instructions page 18

Menu items
[SYSTEM] [A. STBY]
(System) (Auto standby)
[VER] (Version)
[SYS.RST]
(System reset)
[UPDATE]*
(Update)
[WS] [LINK]
(Wireless
[RF CHK]
sound)
(RF check)
* HT-CT780 only
GB
18
Function
You can reduce power consumption. The system enters
standby mode automatically when you do not operate the
system for about 20 minutes and the system is not receiving
an input signal.
• [ON]: Turns on the auto standby function.
• [OFF]: Turns off the function.
The current firmware version information appears on the
front panel display.
You can reset menus and settings (sound fields, etc.) of the
system to the initial status when it does not work properly
(page 30).
Updates will be announced on the Sony website. Update the
system following the instructions on the website.
You can link the wireless sound system again (page 24).
You can check whether the wireless sound system of the
system can communicate or not.
• [OK]: The wireless sound system is working.
• [NG]: The wireless sound system is not working.