Programme
1)
1) Test programme for test institutes
The consumption values are intended as
a guide and depends on the pressure
and the temperature of the water and al-
Care and cleaning
Cleaning the filters
The filters must be checked and cleaned
from time to time. Dirty filters will degrade the
washing result.
Warning! Before cleaning the filters
ensure that the machine is switched off.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a
coarse filter ( A ), a microfilter ( B ) and a
flat filter. Unlock the filter system using the
handle on the microfilter.
Turn the
handle
about
1/4 a
turn anti-
clock-
wise and
remove
the filter
system
3.
Consumption values
Programme duration
(in minutes)
45-55
30
150-160
Energy consumption
(in kWh)
1,0-1,2
0,9
1,0-1,1
so by the variations of the power supply
and the amount of dishes.
4. Take hold of the coarse filter ( A ) by the
handle with the hole and remove from the
microfilter ( B ).
5. Clean all filters thoroughly under running
water.
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
7. Put the flat filter back in the base of the
washing compartment and ensure that it
fits perfectly under the two guides ( C ).
8. Place the coarse filter ( A ) in the microfil-
ter ( B ) and press together.
9. Put the filter combination in place and
lock by turning the handle clockwise to
the stop. During this process ensure that
the flat filter does not protrude above the
base of the washing compartment.
Water consumption
(in litres)
11-12
9
13-15
77