Table des Matières
Publicité
Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
MANUFACTURING INFORMATION
Product Covered
The Solution Series 3.5 ( with models Solution 3.5, Escape 2100, HT-3000, Gateway 3500, Osburn 3500) is a
Wood Fuel Room Heater. The models are constructed of sheet steel. The outer dimensions are 33 3/4-inches
deep, 34 7/16-inches high, and 27 9/16-inches wide. The units have a door located on the front with a viewing
glass.
Proprietary drawings and manufacturing methods are on file at the Intertek site at 1829
32nd Avenue Montreal (Lachine), QC Canada H8T 3J1 and in the EPA filing system. Drawings can also be found
in this specification and in the EPF system.
The Solution 3.5, (the represenattive unit) unit was tested. It is considered a representative unit of the Series 3.5
(Solution 3.5, Escape 2100, HT-3000, Gateway 3500, Osburn 3500).
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
Page 5 of 425
Publicité
Chapitres
Table des Matières
