SBI Escape 2100 Mode D'emploi page 114

Masquer les pouces Voir aussi pour Escape 2100:
Table des Matières

Publicité

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
1 - INSTALLATION MANUAL SOLUTION 3.5 ENGLISH
If the above clearances are met, then the distances measured from the flue outlet will be:
*The pipe distances listed in this table refer to the distances obtained when the stove is
installed in accordance with the appliance clearances above mentioned. However, you can
install the stove at reduced clearances; follow the instructions in Section 7.4: Reducing
Wall and Ceiling Clearances Safely. Where they are followed, the new distance of the pipe to
combustible materials must be respected in the appropriate certification of the pipe.
Solution 3.5 Installation and Operation Manual
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
DISTANCES* FROM PIPE CONNECTOR TO THE
COMBUSTIBLE MATERIALS
CANADA
D
17¾" (451 mm)
E
29" (737 mm)
F
23½" (597 mm)
USA
17¾" (451 mm)
29" (737 mm)
23½" (597 mm)
(29 OF 57)
29
Page 111 of 425

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour SBI Escape 2100

Table des Matières