Configuration - Elvox Vimar PIXEL UP Manuel De L'utilisateur

PIXEL UP: 40405 - 40425
4. Notification messages
The following screen appears in the device start-
up phase and the user must wait for the start-up
phase to complete. Wait for the phase to complete.
If other messages persist, contact the installer.
5.

Configuration

Refer to the PIXEL UP programming manual.
The instruction manual is downloadable from the site www.vimar.com
Installation rules
Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of
electrical equipment in the country where the products are installed.
Conformity
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included
with other general waste at the end of its working life. The user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without
any new purchase obligation) to retailers with a sales area of at least 400m
sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid
the potential negative effects on the environment and people's health, and encourages the re-use and/or recycling of the
construction materials.
Loading...
Starting
, if they measure less than 25cm. An efficient
2
EN
17