Normal Operation; Device Start-Up; Configuration - Elvox Vimar Pixel Up 40414 Manuel De L'utilisateur

PIXEL UP: 40414
4. Notification messages
The following screen appears in the device start-
up phase and the user must wait for the start-up
phase to complete. Wait for the phase to complete.
If other messages persist, contact the installer.
5. Indicators
The device has LEDs used specifically for signalling, in the top left-hand corner.
Icon
5.1

Normal operation

Status
Call in progress
Communication active
Lock activated
Missed communication (user busy or offline)
Video message recording in progress
5.2

Device start-up

Status
A - Switch-on
B – Secondary module detection
C – Secondary module firmware updating in progress
D1 – Device awaiting configuration
D2 – Device configured but not operational
D3 – Device operational
Times: 0.25 s ON, 0.75 s OFF.
1
Times: 1.00 s ON, 0.75 s OFF.
2
6.

Configuration

Refer to the installer manual.
All manuals and user guides at all-guides.com
LED
L1
L2
L3
Loading...
Starting
Colour
Red
Green
Green
LED
L3 flashing
L3 ON
L2 ON
L1 ON
L3 ON, L1 flashing
LED L3
ON
OFF
OFF
Flashing
1
Flashing
2
OFF
EN
LED L2 LED L1
ON ON
OFF Flashing
Flashing Flashing
1
Flashing Flashing
1
Flashing Flashing
2
OFF OFF
1
1
1
2
17