Maintenance And Cleaning; Declaration Of Conformity - Indexa DF300K Mode D'emploi

9. Connection pairing
The additional camera and the monitor DF300M must be paired with each
other to establish the wireless connection. The camera delivered in the DF300
Set is already paired with the monitor on channel 1. In order to connect an
additional camera to the monitor (maximum 3 additional cameras) proceed as
follows:
! Select "Pairing" (Camera Setup) using the direction buttons.
! Tap the camera chanel number to which a new camera should be paired.
! Press the pairing button [9] of the camera within 60 seconds.

10. Maintenance and cleaning

! The products are maintenance-free: do not open the housings
! Check the safety and function regularly
! Remove the mains adapters from the mains sockets before cleaning
! Use a soft, slightly moist cloth or brush to clean the surfaces
11. Disposal
Packaging material or electrical products must not be disposed of as
household waste. Use your recycling system. Details are available
from your local authority.

12. Declaration of conformity

Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product DF300K complies with the basic requirements and the other relevant
regulations of Directive 2014/53/EU
The complete declaration of conformity can be read at: www.pentatech.de
14 - GB
. Conformity has been demonstrated.
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.pentatech.de
Subject to change