Maintenance And Cleaning - Indexa DF400K Mode D'emploi

9. Connection pairing
The additional camera and the smart recorder DF400R must be paired with
each other to establish the wireless connection. The cameras delivered in the
DF400 Set are already paired with the smart recorder on channel 1 and 2. In
order to connect an additional camera to the smart recorder (maximum 2
additional cameras) proceed as follows:
!
Select "Pairing" ([49] - Camera Settings) using the direction buttons.
!
Tap the camera channel number to which a new camera should be paired.
!
Press the pairing button [14] of the camera within 35 seconds.

10. Maintenance and cleaning

!
The products are maintenance-free: do not open the housings
!
Check the safety and function regularly
!
Remove the mains adapters from the mains sockets before cleaning
!
Use a soft, slightly moist cloth or brush to clean the surfaces
11. Disposal
Packaging material or electrical products must not be disposed of as
household waste. Use your recycling system. Details are available
from your local authority.
12. Declaration of conformity
Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product DF400K complies with the basic requirements and the other relevant
regulations of Directive 1999/5/EC. Conformity has been demonstrated. The
complete declaration of conformity can be read at: www.indexa.de
This product can be used in the following countries:
D A L CH
14 - GB
NL
B IRL GB
13. Warranty
In addition to the statutory guarantee from the vendor, the manufacturer
warrants this product for 2 years from date of purchase (proof from receipt)
according to following conditions.This warranty does not affect your legal
rights.
The warranty covers use of the product in normal conditions in private
households. It only covers manufacturing defects and is limited to the
replacement or repair of the faulty components. It does not include wear and
tear, or batteries.
The warranty applies only when the product is used according to the operating
instructions. It does not cover damage arising from misuse, improper handling,
application of force, dust, dirt, water or other environmental factors, or from
incorrect voltage from batteries or power supply.
The warranty is void when the product has been repaired or tampered by
unauthorised persons and when it has been used with components which are
not specified by the manufacturer.
In case of a warranty claim please contact the vendor for details of how to
proceed and how to return the product if necessary. Only carriage paid
authorised returns will be accepted. Repairs can only be accepted when
accompanied by a full description of the fault. After the warranty period has
expired repairs will be charged and are not always possible. Warranty claims do
not extend the warranty period and the warranty for replacement parts expires
with the warranty for the product.
Unless there is a statutory obligation, the manufacturer is not responsible for
further claims, including peronal or material damages, arising from the use of
the product or from nonfunction or misfunction of the product.
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.indexa.de