Package Contents; Technical Data; Proper Use; Features And Equipment - Indexa DF300K Mode D'emploi

Operating instructions
GB
1. Introduction
Read through these operating instructions fully and carefully. The operating
instructions belong to this product and contain important points concerning
bringing the appliance into service and ist operation. Also read the operating
instructions of the basic set.
Always pay attention to all safety instructions. Should you have any questions
or be unsure about operating the appliance ask a specialist. Keep these
instructions in a safe place and should the need arise pass them on to a third
party.

2. Proper use

The additional wireless observation camera consists of camera DF300K and
the mains adaptor. The additional camera is an optional accessory for DF300
Set. It is to be used for the surveillance of rooms, entrance hallways,
driveways etc. through video pictures and sound. The video and audio
transmission is wireless using a frequency of 2.4 GHz.
The power for the DF300K is supplied through the supplied mains adapter
connected to a 230VAC, 50Hz mains supply.
If there is sufficient light a colour picture will be transmitted. At low ambient
light levels the integrated Infrared LEDs are automatically switched on. In this
case the immediate area (max. 20 m) will be illuminated and the video picture
switches to black and white mode for improved light sensitivity. The picture
quality is optimised for day and night opereation by an internal mechanical
filter change. If the surveillance is specifically required in a dark environment,
then additional lighting should be installed.
Up to four wireless cameras DF300KA can be used with one monitor. The
camera channels can be manually selected or automatically displayed in
sequence if the scan mode is selected. The camera pictures can also be observed
simultaneously in quad-split screen mode. The wireless transmission is digital
and on constantly changing frequencies (frequency hopping) which are
synchronised between the camera and the monitor. Only the receiver which has
been "paired" with the camera can receive the synchronised signals. This
security feature prevents access of the camera signal by third parties.
The camera is weatherproof (Protection class IP66) and can be used not only
indoors but also for mounting outside. Wherever possible it should be protected
from direct rainfall. The monitor and both mains adapters are for indoor use
only and must be protected from moisture.
The set is for use in private households. A video surveillance system does not
replace your duty of care or supervision. Observe the regulations concerning
video surveillance in commercial and public areas.
Any other use or modification of the device is not authorised. No liability will be
accepted for consequential damages or for damages caused by improper use or
incorrect operation. No liability will be accepted for consequential damages
caused by any function or by malfunction. Unless any liability is specifically
required by law, claims for damages, in particular those for personal injury or
property damage caused by non-functioning or malfunctioning of the machine,
are excluded.
This appliance is not intended to be used by people (including children) with
12 - GB
restricted physical, sensory or mental capacities, or a lack of experience and/or
knowledge, unless they are supervised by, or receive instructions how to use the
appliance from a person responsible for their safety.

3. Package contents

! DF300K camera with connection cable to mains adapter
! Antenna
! Mains adapter 5VDC
! Camera bracket with screws and plugs
! User manual

4. Technical data

Camera DF300K
Operating Voltage
Current consumption
Channels
Picture sensor
Viewing angle
Light sensitivity
Infrared filter
Illumination
Illumination distance
Microphone
Protection class
Dimensions without antenna (mm) 123 x Ø 60
Operating temperature
Mains Adapter
Operating Voltage
Output

5. Features and Equipment

1 Daylightsensor
2 Power LED
3 Lens
4 Infrared LEDs
5 Connection-LED
6 Antenna connection
7 Fixing hole for bracket
8 Microphone
9 Pairing button
10 Mains adapter connection
11 Triangular nut
12 Wing screw
13 Bracket
14 Antenna
15 Plugs
16 Mains adapter
17 Screws
(s. page 3)
"
5 V DC (mains adapter)
500 mA
4
1/4" CMOS
approx. 63° horizontal
1 Lux (w/o IR-LEDs)
automatic change
25 Infrared LEDs
max. 20 m
built in
IP 66
- 10° C to + 40° C
230 V ~ 50 Hz
"
5 V , 1,0 A
(s. page 3)